Canon PIXMA MP530 Скачать руководство пользователя страница 7

Страница: 7 / 91

1-2. Customer Maintenance

Only for CD / DVD printing supported regions.

Adjustment

Timing

Purpose

Tool

Approx.

time

Print head
alignment

(Auto/Manual)

At print head replacement.

To ensure accurate dot placement. - Machine buttons

- Computer (settings via

the MP driver)

3 min.

Print head
cleaning

When print quality is not satisfying. To improve nozzle conditions.

- Machine buttons

- Computer (settings via

the MP driver)

1 min.

Print head deep
cleaning

When print quality is not satisfying,
and not improved by print head
cleaning.

To improve nozzle conditions.

- Machine buttons

- Computer (settings via

the MP driver)

2 min.

Ink tank
replacement

When an ink tank becomes empty.
("No ink error" displayed on the
monitor, or short flashing of an ink
tank LED)

To replace the empty ink tank.

None.

2 min.

Paper feed roller
cleaning

When paper does not feed properly.

To clean the paper feed rollers.

Machine buttons

2 min.

CD / DVD print
position
adjustment

At CD / DVD printing, when
necessary.

To correct CD / DVD print
position.

Computer (application
software)

5 min.

Bottom plate
cleaning

When the back side of the paper is
smeared.

To clean the platen ribs.

- Machine buttons

- Computer (settings via

the MP driver)

1 min.

Protrusions area
cleaning

When protrusions of the platen
inside the machine are stained.

To wipe ink off the protrusions of
the platen.

Swab or the like

1 min.

Scanning area
cleaning

When the following are dirty:

- Platen glass

- Document pressure sheet

- ADF glass

- White sheet in the back of the ADF

To clean the applicable items.

Soft, dry, and clean lint-
free cloth.

1 min.

ADF cleaning

When inside of the ADF cover is
dirty.

To clean the inside of the ADF
cover

Soft, dry, and clean lint-
free cloth.

1 min.

ASF sub- roller
cleaning

When the paper fed from the ASF is
smeared due to ink mist attached to
the ASF sub-rollers.

To clean the ASF sub-rollers.

- Plain paper

- Machine buttons (paper

feed roller cleaning)

[See Part 2, 4. FAQ,
How to make and set
the ASF sub-roller
cleaning sheet, for
details]

1 min.

1-2

Содержание PIXMA MP530




























































































Результаты поиска

Содержание PIXMA MP530

Отзывы:

Canon PIXMA MP530, Руководство по обслуживанию, Страница: 7 / 91

Результаты поиска

Содержание PIXMA MP530

Отзывы: