Canon PIXMA MP530, Руководство по обслуживанию, Страница: 46 / 91

Note: At the end of the service mode, press the ON/OFF button. The paper lifting plate of the sheet feed unit will be raised.
<Service mode operation procedures>
1) With the machine power turned off, while pressing the Stop/Reset button, press and hold the ON/OFF button. (DO NOT
release the buttons). The COPY button lights in green to indicate that a function is selectable.
2) While holding the ON/OFF button, release the Stop/Reset button. (DO NOT release the ON/OFF button.)
3) While holding the ON/OFF button, press the Stop/Reset button 2 times, and then release both the ON/OFF and Stop/Reset
buttons. (Each time the Stop/Reset button is pressed, the Alarm LED and COPY button light alternately, Alarm in orange
and COPY in green, starting with Alarm LED.) "CANON Idle" is displayed on the LCD.
4) When the COPY button lights in green, press the Stop/Reset button the specified number of time(s) according to the function
listed in the table below. (Each time the Stop/Reset button is pressed, the Alarm LED and COPY button light alternately,
Alarm in orange and COPY in green, starting with Alarm LED.)
- Print information
- Error information
etc.
EEPROM initialization See "Service mode operation procedures"
below. The following items are NOT initialized, and the
shipment arrival flag is not on:
- USB serial number
- Destination settings
- Waste ink counter
- CD / DVD correction value
Waste ink counter reset See "Service mode operation procedures"
below. If the waste ink amount is 7% or more, replace the
ink absorber kit.
Destination settings See "Service mode operation procedures"
below.
Initialize EEPROM after the destination settings.
Button and LCD test See "Service mode operation procedures"
below.
Waste ink amount setting See "Service mode operation procedures"
below.
Time(s) LED indication Function Remarks
0 times Green (COPY)
Power off
When the print head is not installed, the carriage
returns and locks in the home position capped.
1 time Orange (Alarm)
Service test print
See 3-4. Verification Items, (1) Service test print.
2 times Green (COPY) EEPROM information
print
See 3-4. Verification Items, (2) EEPROM
information print.
3 times Orange (Alarm)
EEPROM initialization
4 times Green (COPY) Waste ink counter
resetting
5 times Orange (Alarm)
Destination settings See "Destination settings procedures" below.
6 times Green (COPY)
Print head deep cleaning Cleaning of both black and color
8 times Green (COPY) CD / DVD check pattern
print
Not used in servicing
9 times Orange (Alarm) CD / DVD print position
correction (horizontal: X
direction)
Not used in servicing.
10 times Green (COPY) CD / DVD print position
correction (vertical: Y
direction)
Not used in servicing.
1-41