manualshive.com logo in svg

Canon PIXMA MP530, Руководство по обслуживанию, Страница: 12 / 91

Поделиться
Скачать
Canon PIXMA MP530 Скачать руководство пользователя страница 12

*1:  Only for models supporting CD / DVD printing

 

*2:  Only for models not supporting CD / DVD printing

 

  

  

2-2.  Service Call Errors (by Cyclic Blinking in Orange (Alarm LED) and Green (COPY button), 

or Alarm LED Lit in Orange)

 

Service call errors are indicated by the number of cycles the Alarm LED and COPY button blink, and the corresponding error 
code is displayed on the LCD.

 

to resolve the error, and then perform manual Print Head 
alignment.

  

The remaining ink 
amount unknown. 

 

[1683]

 

CHECK INK

 

U130

 

  

An ink tank which has once been empty is installed. Replace 
the applicable ink tank with a new one.

 

Printing with a once-empty or refilled ink tank can damage the 
print head.

 

If printing is continued without replacing the refilled ink tank, 
press the Stop/Reset button for 5 sec. or longer to record the 
use of a refilled ink tank.

 

Note:

 

After the above operation, the function to detect the remaining 
ink amount is disabled.

 

Ink tank not recognized.

 

[1684]

 

CHECK INK

 

U140

 

A non-supported ink tank is installed (the ink tank LED is 
turned off). Install the supported ink tanks.

Ink tank not recognized.

 

[1410 to 
1419][1682]

 

CHECK INK

 

U150

 

An error occurred in an ink tank (the ink tank LED is turned 
off). Replace the ink tank(s).

Scanning unit (printer 
cover) is open.

 

[1200]

 

COVER IS OPEN

 

Close the scanning unit (printer cover).

Cycles of blinking 

in orange (Alarm 

LED) and green 

(COPY button)

 

Error

Error 

code

Conditions

Solution

 

(Replacement of listed parts, which 

are likely to be faulty)

 

2 times

 

Carriage error

 

[5100] An error occurred in the carriage encoder 

signal.

- Carriage unit

 

- Timing slit film

 

- Logic board

 

- Carriage motor

 

3 times

 

Line feed 
error

 

[6000] An error occurred in the LF encoder signal.

- Timing sensor unit

 

- Timing slit disk film

 

- Feed roller

 

- Platen unit

 

- Logic board

 

- Paper feed motor

 

4 times

 

Purge cam 
sensor error

 

[5C00] An error occurred in the purge unit.

- Purge unit

 

- Logic board

 

5 times

 

ASF (cam) 
sensor error

 

[5700]

 

This error takes place when feeding paper from 
the ASF after an error occurred in the ASF cam 
sensor.

 

- Sheet feed unit

 

6 times

 

Internal 
temperature 
error

 

[5400] The internal temperature is not proper.

- Logic board

  

- Carriage unit

 

7 times

 

Waste ink 
absorber full

 

[5B00]

 

The waste ink absorber is full.

 

- Ink absorber kit

 

8 times

 

Print head 
temperature 
rise error

 

[5200] The print head temperature exceeded the 

specified value.

- Print head

 

- Logic board

 

1-7

Содержание PIXMA MP530




























































































Отзывы:

Нет отзывов