manualshive.com logo in svg

Canon PIXMA MP530, Руководство по обслуживанию, Страница: 15 / 91

Поделиться
Скачать
Canon PIXMA MP530 Скачать руководство пользователя страница 15

##286

 

TX

After EOM transmission, DCN has been received.

##287

 

TX

After MPS transmission, DCN has been received.

##288

 

TX

After EOP transmission, a signal other than PIN, PIP, MCF, RTP, RTN has been received.

##289

 

TX

After EOM transmission, a signal other than PIN, PIP, MCF, RTP, RTN has been received.

##290

 

TX

After MPS transmission, a signal other than PIN, PIP, MCF, RTP, RTN has been received.

##670

 

TX

In V.8 late start, the DIS V.8 ability from the receiving machine was detected, and CI was sent in response; 
however, the procedure failed, causing T1 time-over.

##671

 

RX

In V.8 call reception, the procedure fails to proceed to phase 2 after CM detection, causing T1 time-over.

##672

 

TX

In V.34 transmission, the procedure fails to proceed from phase 2 to phase 3 or later, causing T1 time-over

##673

 

RX

In V.34 reception, the procedure fails to proceed from phase 2 to phase 3 or later, causing T1 time-over

##674

 

TX

In V.34 transmission, the procedure fails to proceed from phase 3 or 4 to the control channel or later, causing 
T1 time-over

##675

 

RX

In V.34 reception, the procedure fails to proceed from phase 3 or 4 to the control channel or further, causing 
T1 time-over

##750

 

TX

After transmitting PPS-NULL in ECM transmission, no significant signal has been received, and re-
transmission of the procedure signal has been attempted the number of specified times but failed.

##752

 

TX

After transmitting PPS-NULL in ECM transmission, DCN has been received.

##753

 

TX

After transmitting PPS-NULL in ECM transmission, re-transmission of the procedure signal has been 
attempted the number of specified times but failed, or T5 time-over (60 sec.) has occurred.

##754

 

TX

After transmitting PPS-NULL in ECM transmission, re-transmission of the procedure signal has been 
attempted the number of specified times but failed.

##755

 

TX

After transmitting PPS-MPS in ECM transmission, no significant signal has been received, and re-
transmission of the procedure signal has been attempted the number of specified times but failed.

##757

 

TX

After transmitting PPS-MPS in ECM transmission, DCN has been received.

##758

 

TX

After transmitting PPS-MPS in ECM transmission, re-transmission of the procedure signal has been 
attempted the number of specified times but failed, or T5 time-over (60 sec.) has occurred.

##759

 

TX

After transmitting PPS-MPS in ECM transmission, re-transmission of the procedure signal has been 
attempted the number of specified times but failed.

##760

 

TX

After transmitting PPS-EOM in ECM transmission, no significant signal has been received, and re-
transmission of the procedure signal has been attempted the number of specified times but failed.

##762

 

TX

After transmitting PPS-EOM in ECM transmission, DCN has been received.

##763

 

TX

After transmitting PPS-EOM in ECM transmission, re-transmission of the procedure signal has been 
attempted the number of specified times but failed, or T5 time-over (60 sec.) has occurred.

##764

 

TX

After transmitting PPS-EOM in ECM transmission, re-transmission of the procedure signal has been 
attempted the number of specified times but failed.

##765

 

TX

After transmitting PPS-EOP in ECM transmission, no significant signal has been received, and re-
transmission of the procedure signal has been attempted the number of specified times but failed.

##767

 

TX

After transmitting PPS-EOP in ECM transmission, DCN has been received.

##768

 

TX

After transmitting PPS-EOP in ECM transmission, re-transmission of the procedure signal has been 
attempted the number of specified times but failed, or T5 time-over (60 sec.) has occurred.

##769

 

TX

After transmitting PPS-EOP in ECM transmission, re-transmission of the procedure signal has been 
attempted the number of specified times but failed.

##770

 

TX

After transmitting EOR-NULL in ECM transmission, no significant signal has been received, and re-
transmission of the procedure signal has been attempted the number of specified times but failed.

##772

 

TX

After transmitting EOR-NULL in ECM transmission, DCN has been received.

##773

 

TX

After transmitting EOR-NULL in ECM transmission, re-transmission of the procedure signal has been 
attempted the number of specified times but failed, or T5 time-over (60 sec.) has occurred.

##774

 

TX

After transmitting EOR-NULL in ECM transmission, ERR has been received.

##775

 

TX

After transmitting EOR-MPS in ECM transmission, no significant signal has been received, and re-

1-10

Содержание PIXMA MP530




























































































Отзывы:

Нет отзывов