Canon PIXMA MP530, Руководство по обслуживанию, Страница: 11 / 91

Print head temperature
sensor error
[1403]
CHECK CARTRIDGE
U052
Re-set the print head. If the error is not cleared, the print head
may be defective. Replace the print head.
Faulty EEPROM data of
the print head
[1405]
Inner cover open before
start of printing on paper
(print continuable).
*2
[1841] INNER COVER IS OPEN Close the inner cover, and press the OK button.
Inner cover open during
printing on paper (print
NOT continuable).
*2
[1846]
Close the inner cover, and press the OK button to clear the
error. The paper being printed at error occurrence will be
ejected without printing the remaining data for the ejected
paper, then printing will resume from the next page.
Inner cover open before
start of printing on paper
(print continuable).
*1
[1851]
Close the inner cover, and press the OK button.
Inner cover open during
printing on paper (print
NOT continuable).
*1
[1856]
Close the inner cover, and press the OK button to clear the
error. The paper being printed at error occurrence will be
ejected without printing the remaining data for the ejected
paper, then printing will resume from the next page.
Inner cover closed before
start of CD / DVD
printing (print
continuable).
*1
[1850]
INNER COVER
CLOSED Open the inner cover which functions as the CD / DVD tray
feeder, set the CD / DVD tray in the feeder, and press the OK
button.
Inner cover closed
during CD / DVD
printing (print NOT
continuable).
*1
[1855]
Open the inner cover, and press the OK button to clear the
error. The CD or DVD being printed at error occurrence will
be ejected without printing the remaining data for the ejected
CD or DVD, then the next print job will be done.
Multiple ink tanks of the
same color installed.
[1681] CHECK INK
U071
Replace the wrong ink tank(s) with the correct one(s).
Ink tank in a wrong
position.
[1680]
CHECK INK
U072
Install the ink tank(s) indicated on the LCD in the correct
position.
Warning: The waste ink
absorber becomes almost
full.
[1700]
WASTE INK NEAR
FULL Press the OK button.
The service call error, indicating the waste ink absorber is full,
is likely to occur soon.
Once the waste ink absorber becomes completely full, printing
cannot be done until the waste ink absorber is replaced.
The connected digital
camera or digital video
camera does not support
Camera Direct Printing.
[2001]
INCOMPATIBLE
CAMERA
DISCONNECT
CAMERA CABLE
Remove the cable between the camera and the machine.
Failed in automatic print
head alignment.
[2500]
HEAD ALIGNMENT
ERROR - A4/Letter-sized paper is not loaded on the Auto Sheet
Feeder.
Press the [OK] on the machine to clear the error, then load a
few sheets of A4/Letter-sized paper in the Auto Sheet Feeder.
Automatic head alignment cannot be performed using paper
from the Cassette. For automatic Print Head alignment,
always load paper in the Auto Sheet Feeder.
- Print Head nozzles are clogged.
Press the [OK] to resolve the error. Print the nozzle check
pattern to check the status of the Print Head.
- The Paper Output Slot has been exposed to a strong light
source preventing current Print Head alignment. Press the
[OK] to resolve the error. Adjust the printer position so the
Paper Output Slot will not be exposed directly to a strong
light source.
After carrying out the above measures, if the problem
continues after aligning the Print Head again, press the [OK]
1-6