Canon PIXMA MP530 Скачать руководство пользователя страница 48

Страница: 48 / 91

3) Press the ON/OFF button to proceed to the next step.

4) The waste ink amount can be set in 10% increments by pressing the Stop/Reset button. Press the Stop/Reset button the

appropriate number of time(s) to select the value which is closest to the actual waste ink amount.

5) Press the ON/OFF button to set the selected value to the EEPROM. Print EEPROM information to confirm that the value is

properly set to the EEPROM.

Confirm the operation after replacement of the LCD unit, Operation panel unit, or Scanner unit.

1) In the Button and LCD test mode, press the Stop/Reset button. The LCD turns black as follows.

1 time

Platen waste ink absorber

Not valid for the MP530

2 times

Both the main and platen waste ink
absorbers

Only the main waste ink absorber is valid for the MP530

3 times or

Not valid

Press the ON/OFF button to return to the waste ink amount
setting mode.

Time(s)

Waste ink amount value to be set (%)

0 times

1 time

10%

2 times

20%

3 times

30%

4 times

40%

5 times

50%

6 times

60%

7 times

70%

8 times

80%

9 times

90%

10 times or more

Not valid.

Press the ON/OFF button to return to the waste ink amount setting mode.

1-43

Содержание PIXMA MP530




























































































Результаты поиска

Содержание PIXMA MP530

Отзывы:

Canon PIXMA MP530, Руководство по обслуживанию, Страница: 48 / 91

Результаты поиска

Содержание PIXMA MP530

Отзывы: