manualshive.com logo in svg

Canon LBP-800, Руководство по обслуживанию

Поделиться
Скачать
Canon LBP-800 Скачать руководство пользователя страница 57

C. Microsoft Windows 95/98
1. Installation of CAPT

A Canon Advanced Printing System disk is packed with this printer.  Types and contents are as
follows:

Types

• A 5 inch CD-ROM disk

Contents

• CAPT driver
• Language monitor
• Status window
• Parallel port driver
• Installer
• CD-ROM menu
• Uninstaller
• Trouble shooter
• On-line help
• On-line manual
• Voice messages

a. Operating Environment

The following environment is required to install CAPT.

● 

PC hardware

This printer supports an IBM-PC or its compatible machine.  Operation conditions are shown
below:
<Minimum Operating Environment>

• CPU: Pentium or above
• RAM: 16 MB or above
• Available disk space: 15 MB or above
• Printer port: Standard Centronics parallel port
• CD-ROM drive
• Sound: PCM sound module is required to use the sound.
• Monitor size: 640 x 480 or above, 16 colors or above
• Network: 10 Base-T or 100 Base-TX is required to use the network adapter.

<Recommended Operating Environment>

• CPU: MMX Pentium 200 MHz or above
• RAM: 24 MB or above

●

OS software

This printer operates on Microsoft Windows 95/98.

This printer does not operate on other OSs, such as Windows NT3.x, Windows for

Workgroups, Windows CE and Windows on OS/2.  In general, Windows language and the lan-
guage of this printer must match.

●

Printer Cable

• Use a bi-directional 8-bit parallel interface cable for IBM-PC.
• Connections through the printer selector and printer buffer are not supported.

CHAPTER 1

1 - 49

Содержание LBP-800



















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды