manualshive.com logo in svg

Canon LBP-800, Руководство по обслуживанию

Поделиться
Скачать
Canon LBP-800 Скачать руководство пользователя страница 55

When the Trouble Shooter is executed by clicking the Yes button, it checks the items below.

Checks the Local

• Displays the free disk and free memory.
• Checks the installed files.
• Checks the selected ports.
• Checks the resistory.
• Checks the RapidPort communication device driver (only Microsoft Windows NT.)
• Checks the language monitor.
• Checks the printer driver.
• Checks the Status Window.
• Checks each item of the Printer Property.
• Checks the Program Folder.

Checks the Network

• Checks the Network server.
• Checks the network printer.
• Checks the reconnection of the port (only Microsoft Windows 95/98.)

The Trouble Shooter displays an error message with available information when it encoun-

ters a problem.  Make sure to solve problems and perform the necessary procedures as required.

CHAPTER 1

1 - 47

Содержание LBP-800



















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды