Canon LBP-800 Скачать руководство пользователя

Страница: 174 / 178

1. Idling status

The idling status is defined that printing jobs are not contained in the printer, and no troubles
for printing are found.

The following 3 messages are indicated for the idling status:

Message area:

Printer Ready

Error message area:

None

Indicated regularly when the status window is started up.

Message area:

Printing Completed

Error message area:

None

Indicated when a printing job is completed.

Message area:

Printing Stopped

Error message area:

None

Indicated when a printing job is stopped.

2. Printing status

The printing status is defined that printing jobs are contained in the printer, and no troubles for
printing are found.

The following 4 messages are indicated for the printing status:

Message area:

Printing

Error message area:

None

Indicated regularly.

Message area:

Printing Paused

Error message area:

None

Indicated when the Pause Job button is clicked during printing.

Message area:

Stopping

Error message area:

None

Indicated when the Delete Job button is clicked during printing.

Message area:

Cleaning

Error message area:

None

Indicated when the Cleaning menu is clicked.

3. Status Not Available

The Status Not Available is defined that printer information is not available.

The following 3 messages are indicated for the Status Not Available.

Message area:

Status Not Available

Error message area:

The printer is connected to a port of an unsupported type.

Indicated when the printer is connected as a local printer, and the port is not supported
(FILE, LPT1.DOS, and so on.)

APPENDIX

A - 8

Содержание LBP-800


















































































































































































Результаты поиска

Содержание LBP-800

Отзывы:

Похожие инструкции для LBP-800

Бренды по названию

Популярные бренды

Canon LBP-800, Руководство по обслуживанию

Результаты поиска

Содержание LBP-800

Отзывы:

Похожие инструкции для LBP-800

Бренды по названию

Популярные бренды