manualshive.com logo in svg

Canon LBP-800, Руководство по обслуживанию

Поделиться
Скачать
Canon LBP-800 Скачать руководство пользователя страница 37

b. Document Defaults

• How to open the Document Defaults box

The Document Defaults box can be opened by the following procedures below.

From the Microsoft Windows desktop

1) Perform one of the following methods to open the Printer folder.
• Start button / Settings / Printers
• My Computer / Printers 
• Control Panel / Printers
2) Open the printer from the Printers folder.
• Click the right mouse on the Canon LBP-800 icon and select the Document Defaults box.
• Double-click on the Canon LBP-800 icon to open the Canon LBP-800 print queue window,
and select the Document Defaults in the Printer menu.

From the Microsoft Windows applications

As how to open the Document Defaults box varies in each application, refer to each appli-
cation manual.

From the Microsoft Windows shortcut

• To create a shortcut, open the Printers folder, drag the Canon LBP-800 icon with the right
mouse button to the desktop, and select the Create the Shortcut(s) Here. (See the Microsoft
Windows NT User’s Guide for details.) 
Double-click on the shortcut icon to open the printer window and then select the Document
Defaults in the Printer menu.
• To create a shortcut to the Printer folder, open the My Computer, drag the Printers icon
with the right mouse button to the desktop, and select the Create Shortcut(s) Here. (See the
Microsoft Windows User’s Guide for details.)
Double-click on the shortcut to open the Printer folder, click the right mouse on the Canon
LBP-800, and then select the Document Defaults.

CHAPTER 1

1 - 29

Содержание LBP-800



















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды