Canon LBP-1000, Руководство по обслуживанию

Страница: 64 / 178

A positive charge applied to the back of the paper attracts the negatively charged toner particles
to the paper.
Roller transfer method is applied to stabilize the paper feed and to reduce ozone generation.
Step 5: Separation
Figure 2-4-11
The elasticity of the paper causes it to separate from the drum.
To stabilize the paper feed system and prevent droplets on the printed image at low temper-
ature and humidity, the charge on the back of the paper is reduced by the static charge elimi-
nator.
4. Fixing block
As the toner image transferred onto the paper in the transfer block is adhered only by electro-
static attraction, even a light touch will smear the image.
The toner particles are fused to the paper to make an permanent image by applying pressure
and heat to the paper and the toner.
Step 6: Fixing
Figure 2-4-12
As the toner particles transferred onto the paper are held to the paper by the positive charge
CHAPTER 2
2 - 30
Paper
Transfer charging roller
Static charge eliminator
Photo-
sensitive
drum
Fixing film Fixing heater
Paper
Toner
Pressure roller
Fixing film
Toner
Pressure roller