Canon IR3250, Сетевое руководство

Страница: 89 / 106

Installing and Using NetSpot 5-6
Using the Netw
or
k and Pr
inter Settings with NetSpot
5
Configuration
After you have installed NetSpot, you must enable communication with the network interface. For
instructions on configuring the network, refer to “Getting Started” in the online
NetSpot User’s
Guide .
Overview of Network Device Management
NetSpot enables you to set up and control most Canon devices that contain a network interface. Its
features include the following:
●
Configures protocols
The Setup tool enables you to configure protocols and print applications.
●
Displays device features and status
The Features tool displays features such as paper tray settings, duplexing capabilities, and
finisher options. A list of these features can help you decide which device is appropriate for
a job.
The Status tool displays the status (such as readiness and error messages) of a device.
●
Manages print jobs (on some platforms and protocols)
The Jobs tool displays the document name, job status, job size, and job owner for each job.
It also enables you to manipulate jobs. For example, if a job is in the queue of a device that
becomes unavailable, you can move the job to another device’s queue. Or, if you are in a
hurry for a particular job, you can move it up in a queue.
8
To install devices, run
#./cpinstall.sh DEVICE_ID DEVICE_NAME IP_ADDRESS
where
DEVICE_ID is the 12-digit MAC address
DEVICE_NAME is the name you want to assign to the device
IP_ADDRESS is in dotted decimal notation (xxx.xxx.xxx.xxx)
9
Follow the shell’s instructions.
00̲MFPNG.book 6 ページ ２０００年４月２６日 水曜日 午後５時１１分