Canon IR3250, Сетевое руководство

Страница: 67 / 106

NetWare Print Service Settings 3-6
3
Using a NetW
are Netw
or
k
(Windo
ws)
NetWare print service settings are now complete. Continue to the next section and specify the pro-
tocol settings.
Setup Using PCONSOLE
Use PCONSOLE when using the Bindery mode with either the queue server
mode or remote printer mode (NetWare 3.2).
1
Log on to NetWare as the Supervisor, and start PCONSOLE.
2
If you have not already set up a print server, use the following procedure to set up the
print server.
●
From the Available Options menu, select Print Server Information, then press the Enter key.
●
Press the Insert key.
●
Enter the name of the print server you are setting up, and press the Enter key.
●
Press the ESC key to return to the Available Options menu.
NOTE
• Make sure to remember the name of the print server. You need it to enter the machine’s protocol set-
tings.
3
Set up a Queue using the following procedure, and assign it to the print server.
●
From the Available Options menu, select Print Queue Information, then press the Enter key.
●
Press the Insert key.
●
Enter the name of the queue you are setting up, then press the Enter key.
●
Select the name of the queue you entered, then press the Enter key.
●
Select Queue Servers, then press the Enter key.
●
Press the Insert key.
●
Select the print server you set up in Step 2, then press the Enter key.
●
Press the ESC key until you return to the Available Options menu.
00̲MFPNG.book 6 ページ ２０００年４月２６日 水曜日 午後５時１１分