Macintosh Network Settings
4-3
4
Using an AppleT
alk Netw
or
k
Macintosh Network Settings
Verify the Macintosh network settings.
The Macintosh network settings are now complete. Continue to the next section to enter the protocol
settings.
1
Check that AppleTalk is active.
●
Select the Chooser from the Apple menu.
●
Check that the AppleTalk setting is Active. If it is Inactive, click Active option.
2
Check that the AppleTalk connection method is EtherTalk or Ethernet.
●
From the Apple menu, open the control panel menu and select Network or AppleTalk.
●
Set the selection to EtherTalk or Ethernet.
●
Close the Network or AppleTalk control panel to save the selection.
NOTE
• Some Mac operating systems enable you to use either Network or AppleTalk.
• In an environment connecting to Ethernet through LocalTalk, select either LocalTalk or Printer Port.
00̲MFPNG.book 3 ページ 2000年4月26日 水曜日 午後5時11分
Содержание IR3250
