Canon IR3250, Сетевое руководство

Страница: 66 / 106

NetWare Print Service Settings 3-5
3
Using a NetW
are Netw
or
k
(Windo
ws)
Setup Using NetWare Administrator
Use NetWare Administrator when using NDS queue server mode or remote
printer mode (NetWare 4.1 or later).
1
Log on to NetWare with Administrator or equivalent access, and start NetWare Admin-
istrator.
2
Execute Quick Setup.
Select the container object for the printer object you want to create, and then go to the Tools
menu and select Print Services Quick Setup.
3
Enter the Print Server, Printer, and Queue settings.
●
Enter the Print Server name.
To use an existing Print Server, click on the button to the right of the Printer Server name text
box and select a Printer Server from the drop-down list box.
●
In the Printer column, enter the printer name under Name.
●
Under Type select the printer connection method.
If you are using the queue server mode, select Other/Unknown.
If you are using the remote printer mode, select Parallel, then click the Communication button
to open the Parallel Communication dialog box. Then set the Port to LPT1, and the Connec-
tion type to Manual load. Under interrupts, enter the appropriate setting for your environment.
Click the OK button to close the Parallel Communication window.
●
In the Print Queue column, enter the queue name under Name. Under Volume, enter the vol-
ume in which the queue is placed. Click on the button to the right of the Volume name text box
and select a Volume from the drop-down list box.
●
Click the Create button and exit NetWare Administrator.
NOTE
• Make sure to remember the name of the print server. You need it to enter the machine’s protocol set-
tings.
4
If you are using the remote printer mode, use the following procedure to restart the
print server.
(In the queue server mode this is not required.)
●
If you are using the NetWare file server as a print server, enter Load PSERVER.NLM in the
file server and press the Enter key.
03̲MFPNG.FM 5 ページ ２０００年４月２７日 木曜日 午前１１時５４分