Canon iR2318 series, Руководство по обслуживанию, Страница: 71 / 308

Chapter 2
2-17
7) Affix the cassette size label [1] to the paper size indication plate [2].
F-2-37
8) Affix the caution sheet [1] printed in an appropriate language.
F-2-38
9) Align the left, right, and leading edges of sheets and load the stack of paper
[1] in the cassette. Make sure that the paper is below the claws [2] of the
cassette.
F-2-39
10) Holding the knob at the center of the cassette, insert the cassette in the
machine it stops.
2.2.5 Attaching the Reversal Trays (Only if equipped with
duplex unit)
0027-3668
1) Attach the supplied reversal tray (sub) [2] to the supplied reversal tray [1]
and then attach them to the reversal guide [3] of the paper ejection part.
F-2-40
F-2-41
2.2.6 Checking the Image Quality
0020-4259
1) Plug [1] of the power cord into the outlet, and then turn on the main power
switch [2].
Supply of toner will start after the initial rotation. After a few minutes,
supply of toner finishes and the machine stops automatically.
F-2-42
MEMO:
Inserting the cassette into the machine with the inner plate locked into the
cassette will unlock the inner plate automatically. If the inner plate is not
locked, press the "PUSH DOWN" mark on the inner plate to lock it into the
cassette and then load paper.
A4
[1]
[2]
[1]
[2]
[1]
When the Finisher-U2 is connected, attach only the reversal tray [1] on the
top of the main body of the finisher. (The reversal tray (sub) is no longer
used.)
Notice on connecting the power supply.
For Norway only:
The product is manufactured considering that it would be connected to IT
system.
Use the specified power supply (rated voltage -/+10% and rated current).
[2]
[1]