manualshive.com logo in svg

Canon iR2318 series, Руководство по обслуживанию, Страница: 162 / 308

Поделиться
Скачать
Canon iR2318 series Скачать руководство пользователя страница 162

Chapter 6  

6-10

6.9 Photosensitive Drum Cleaning

6.9.1 Outline

0020-4110

Toner reaming on the photosensitive drum after image transfer is scraped by the photosensitive drum cleaner blade and is fed in the waste toner box.

6.9.2 Waste Toner Full Detection

0020-4111

The waste toner collected by the cleaner blade is fed to the waste toner box using the waste toner feed screw in the drum unit. A torque limiter is provided at the

end of the waste toner feed screw is provided with a torque limiter. When the waste toner box is filled with waste toner, the torque limiter goes on to stop the waster

toner feed screw. As a result, the sensor flag of the waster toner full sensor (SR206) is pushed intermittently, reporting the waste toner full condition to the DC

controller PCB. 

F-6-15

[1] Cleaner blade

[2] Waste toner stirring rod

[3] Waste toner box

[4] Torque limiter 

[5] Drum

MEMO:

The waste toner box is capable of storing about 630 g of toner.

[3]

[5]

[4]

SR206

[1]

[2]

Содержание iR2318 series





















































































































































































































































































































Отзывы:

Нет отзывов