Canon iR2318 series, Руководство по обслуживанию, Страница: 285 / 308

Chapter 14
14-13
- Sensor [2]
- Sensor [3]
- Sensor [4]
- Sensor [5]
- Sensor [6]
- Sensor [7]
ADF Feed Test
ADF operation verification mode. Place a document on the document platen and press the start key to transfer the document at the speed matched to the magnifi-
cation setting.
Book Feed Test
Performs a book feed operation with a specified magnification and in a specified size.
Panel test
Operation panel operation verification mode. Functions that can be verified from this menu are listed below.
- LCD/LED test
Start the Panel test by pressing the OK key. The LCD test is carried out first, displaying all-H characters. Press the start key once again to produce a total black
display. And then, Press the start key, turn on all LED.
Display Position Sensor Name Explaination
CAS SW4(left) Cassette 1 size switch 1:Pressed, 0:Not pressed
SW3(middle left) 1:Pressed, 0:Not pressed
SW2(middle right) 1:Pressed, 0:Not pressed
SW1(right) 1:Pressed, 0:Not pressed
LOCK - Cover switch (SW2 and SW3) 1:Cover open, 0: Cover closed
OP1 SW4(left) Cassette 2 size switch 1:Pressed, 0:Not pressed
SW3(middle left) 1:Pressed, 0:Not pressed
SW2(middle right) 1:Pressed, 0:Not pressed
SW1(right) 1:Pressed, 0:Not pressed
OP2 SW4(left) Cassette 3 size switch 1:Pressed, 0:Not pressed
SW3(middle left) 1:Pressed, 0:Not pressed
SW2(middle right) 1:Pressed, 0:Not pressed
SW1(right) 1:Pressed, 0:Not pressed
OP3 SW4(left) Cassette 4 size switch 1:Pressed, 0:Not pressed
SW3(middle left) 1:Pressed, 0:Not pressed
SW2(middle right) 1:Pressed, 0:Not pressed
SW1(right) 1:Pressed, 0:Not pressed
Display Position Sensor Name Explaination
DS - ADF document sensor (PI11) On:Paper presence, Of:Paper absence
DES - ADF read sensor (PI7) On:Paper presence, Of:Paper absence
HPS - CIS HP sensor (SR401) On:Paper presence, Of:Paper absence
BCVS -
Copyboard cover open/closed sensor (front)
(SR403)
On:Cover open, Of:Cover closed
Display Position Sensor Name Explaination
REF - - Toner reference voltage
ANT - - Toner antenna voltage
[ANT-REF] - - Differential voltage
Display Position Sensor Name Explaination
BSCT - Copyboard cover open/closed sensor (rear) (SR402) On:Cover open, Of:Cover closed
BDOC - -
Document size: Paper size indicated in a mix of document size
sensors
BDSS left Original sensor 4 or 5 (SR407 or SR408) On:Document presence, Of:Document absence
middle left Original sensor 3 (SR406) On:Document presence, Of:Document absence
middle right Original sensor 1(SR404) On:Document presence, Of:Document absence
right Original sensor 2 (SR405) On:Document presence, Of:Document absence
Display Position Sensor Name Explaination
LAST - Last document deteciton sensor (PI3) On:Paper absence, Off:Paper presence
EXIT - Delivery reversal sensor (PI6) On:Paper presence, Off:Paper absence
REG - Registration paper sensor (PI8) On:Paper presence, Off:Paper absence
CVR - Cover open/close sensor (PI10) On:Cover open, Of:Cover closed
Display Position Sensor Name Explaination
WID1 - Document width sensor 1(PI2) On:Paper presence, Off:Paper absence
WID2 - Document width sensor 2(PI1) On:Paper presence, Off:Paper absence
LEN1 - Document length sensor 1 (PI4) On:Paper presence, Off:Paper absence
LEN2 - Document length sensor 2 (PI5) On:Paper presence, Off:Paper absence