Canon imageRUNNER 2830 Скачать руководство пользователя страница 320

Страница: 320 / 352

Error Messages

8-12

rou

lesh

# 701

Cause

The specified Department ID does not exist, or the password has changed.

Remedy

Enter the correct Department ID or password using

(numeric keys) on

the control panel, and try sending again.

# 702

Cause

The document could not be sent because the memory is full.

Remedy 1 Wait a few moments, and try again after other send jobs complete.

Remedy 2 Do not send the document to too many recipients at the same time. Send the

document to a smaller number of recipients.

# 703

Cause

The memory for the image data is full.

Remedy 1 Wait a few moments, and try again after other send jobs complete.

Remedy 2 Erase documents stored in inboxes. If the machine still does not operate

normally, turn the main power OFF, and then back ON.

# 704

Cause

An error occurred while reading address information from the Address Book.

Remedy

Check the address settings. If the machine still does not operate normally, turn
the main power OFF, and then back ON.

# 706

Cause

The Address Book is being imported or exported from the Remote UI, or it is
being used by another sending component.

Remedy

Wait until the Address Book Import/Export function from the Remote UI or the
other sending component is complete, and try sending again.

# 711

Cause

The inbox memory is full.

Remedy

Erase unnecessary documents stored in the inbox. (See "Printing and Erasing
Documents," on p. 3-11, and Chapter 5, "Using/Arranging Documents Stored in
an Inbox," in the

Mail Box Guide

Содержание imageRUNNER 2830

































































































































































































































































































































































Результаты поиска

Содержание imageRUNNER 2830

Отзывы:

Похожие инструкции для imageRUNNER 2830

Бренды по названию

Популярные бренды

Canon imageRUNNER 2830, Инструкция по факсимиле

Результаты поиска

Содержание imageRUNNER 2830

Отзывы:

Похожие инструкции для imageRUNNER 2830

Бренды по названию

Популярные бренды