Canon imageRUNNER 2830 Скачать руководство пользователя страница 330

Страница: 330 / 352

Report and List Samples

9-6

App

end

■

ST. TIME (Start Time)

The date and time (in 24-hour notation) at which the document started to be received are
printed.

■

USAGE T

The time taken (in minutes and seconds) to receive the document from start to finish is
printed.

■

PGS.

The number of pages that were received successfully is printed.

■

RESULT

If the documents were received successfully, "OK" is printed.

If a reception error occurred, "NG" (No Good) is printed.

If a reception error occurred, the page number in which the error occurred, and the error
code number are printed.

Memory Inbox Reception Report

This report enables you to confirm that documents were received in a Memory Box.

You can set whether to automatically print a Memory Inbox Reception Report.

NOTE

The default setting is 'On'. (See "Memory Inbox RX Report," on p. 7-12.)

■

INBOX NO./NAME

The number (00 to 49) and user assigned name of the Memory Box in which the
documents were received is printed.

Содержание imageRUNNER 2830

































































































































































































































































































































































Результаты поиска

Содержание imageRUNNER 2830

Отзывы:

Похожие инструкции для imageRUNNER 2830

Бренды по названию

Популярные бренды

Canon imageRUNNER 2830, Инструкция по факсимиле

Результаты поиска

Содержание imageRUNNER 2830

Отзывы:

Похожие инструкции для imageRUNNER 2830

Бренды по названию

Популярные бренды