Interface Settings (Ethernet Driver)
2-3
Co
nn
e
c
tin
g
th
e Ma
ch
in
e
to
a TC
P/IP
Ne
twor
k
2
3
S
pecify the communication mode.
●
If you want the machine to automatically determine the communication
mode (Half duplex/Full duplex) and Ethernet type (10BA
S
E-T/
100BA
S
E-TX):
●
If you want to manually
s
pecify the communication mode (Half duplex/
Full duplex) and Ethernet type (10BA
S
E-T/100BA
S
E-TX):
IMPORTANT
Connect the cable with the power OFF. Even when you set <Auto Detect> to ‘On’, the
Auto Detect function will not work correctly if you reconnect the network cable (for
example, to a different Ethernet hub) with the power ON.
NOTE
•
The default setting is ‘On’. Use the [Off] setting when you want to specify a particular
Ethernet setting.
•
The above screen also allows you to check the machine’s MAC address.
❑
Press [On] for <Auto Detect>.
❑
Press [Off] for <Auto Detect>.
❑
Press [Half Duplex] or [Full Duplex] for
<Communication Mode>.
❑
Press [Full Duplex] if you want to
alternately send and receive. Press [Half
Duplex] if you want to simultaneously
send and receive.
❑
Press [10 Base-T] or [100 Base-TX] for
<Ethernet Type>.
