Setting Department ID Management
6-6
Pr
ot
ect
ing t
he Ma
ch
ine
f
rom Unau
th
or
iz
e
d
Acce
ss
6
NOTE
•
<Total Print Lim> is the sum of <Copy Limit> and <Print Limit>.
•
<B&W Scan Limit> is available only when the Send function (optional for the
imageRUNNER 2545/2535/2530/2525/2520) is activated or the optional Super G3 Fax
Board-AG1 is attached to the machine.
<Color Scan Limit> is available only when the Send function (optional for the
imageRUNNER 2545/2535/2530/2525/2520) is activated.
IMPORTANT
•
The machine stops sending a fax if the Scan Limit is reached while faxing a document
either from memory or directly to the recipient.
•
The machine stops scanning if the Scan Limit is reached while the machine is
scanning originals that are being fed from the feeder. (Those originals that were
scanned before the limit was reached are not added to the scan count.)
NOTE
•
If you make a mistake when entering a number, press
(Clear)
➞
enter the correct
number.
•
You can set the page limit from 0 to 999,999 pages. Once the page limit is reached,
copying, scanning, or printing is not possible.
•
The page limit refers to the number of printed surfaces. Therefore, a two-sided print is
counted as two pages.
7
Pre
ss
[On] under the de
s
ired
function(
s
).
If you do not want to set a page limit
restriction for the function, press [Off].
8
Pre
ss
[
] (Pa
g
e Limit) next to
[On]/[Off] of the de
s
ired
function(
s
)
➞
enter the pa
g
e limit
re
s
triction u
s
in
g
-
(numeric
key
s
).
