Canon imagePRESS C10000VPSeries, Руководство по устранению неисправностей

Страница: 118 / 265

- When attaching the sheet metal to the shaft part, be sure to have the protrusion [a] facing outward.
c-7) Assemble the parts in the reverse order from the step c-3).
[Reference] Combination of the new and the old type tension roller and roller holder are as below.
Tension roller
Old type
New type
Roller holder Old type A B
New type C D
A : The combination of the old type parts. Continuously usable until the counter becomes 9000K (high durable parts), if there is
no breakage of the second transfer outer belt or roller holder.
B : Push the shaft part of the tension roller to release tension.
C : It is difficult to release tension as the claw of the roller holder is short (2mm) in this case. Recommended to replace the tension
roller to the new type.
D : The combination of the new type parts.
[Service parts]
No. Part Number Description Q'ty Fig.No.
1 Old FM1-A345-010 2ND TRANSFER BELT ASSEMBLY 1->0 334
New FM1-A345-020 2ND TRANSFER BELT ASSEMBLY 0->1
2 Old FE4-6074-000 HOLDER, ROLLER 1->0 334
New FE4-6074-010 HOLDER, ROLLER 0->1
3 Old FE4-6069-000 ROLLER, TENSION 1->0 334
New FE4-6069-010 ROLLER, TENSION 0->1
4 Old XD2-1100-502 RING,E 1->1
New
5 Old FL0-5503-000 SEAL, SIDE, FRONT 1->0 335
New FL0-5503-010 SEAL, SIDE, FRONT 0->1
6 Old FL0-5504-000 SEAL, SIDE, REAR 1->0 335
New FL0-5504-010 SEAL, SIDE, REAR 0->1
7 Old 335
New FL0-5505-000 COVER, BELT CLEANER, LOWER 0->1
8 Old
FE4-6070-000
*1
ROLLER, BACK-UP 1->0 334
New
113