Canon imagePRESS C10000VPSeries, Руководство по устранению неисправностей

Страница: 186 / 265

i-2) Check if there is a disconnected connector or a cutoff harness between UN311/J4013 to UN402/J6303.
i-3) Check if there is a disconnected connector for UN402/J6301 and J6302.
i-4) Replace the UN402 (Fixing Relay PCB).
j) For the case that bit1 of [PWR- GP6] shows "1". (All 24V errors of 24VA system are detected.)
j-1) Check if there is a disconnected connector or a cutoff harness between UN520/J202A to UN401/J6002.
j-2) Replace the UN520 (24V Power Supply PCB A).
k) For the case that bit2 of [PWR- GP6] shows "1". (All 24V errors of 24VB system are detected.)
k-1) Check if there is a disconnected connector or a cutoff harness between UN521/J202B toUN401/J6003.
k-2) Replace the UN521 (24V Power Supply PCB B).
l) For the case that bit3 of [PWR- GP6] shows "1". (All 24V errors of 24VC system are detected.)
l-1) Check if there is a disconnected connector or a cutoff harness between UN522/J202C to UN401/J6007.
l-2) Replace the UN522 (24V Power Supply PCB C).
m) For the case that bit4 of [PWR- GP6] shows "1". (All 24V errors of 24VD system are detected.)
m-1) Check if there is a disconnected connector or a cutoff harness between UN523/J202D to UN401/J6005.
m-2) Replace the UN523 (24V Power Supply PCB D).
n) For the case that bit5 of [PWR- GP6] shows "1". (All 24V errors of 24VE system are detected.)
n-1) Check if there is a disconnected connector or a cutoff harness between UN524/J202E to UN401/J6006.
n-2) Replace the UN524 (24V Power Supply PCB E).
o) For the case that bit6 of [PWR- GP6] shows "1". (All 24V errors of 24VF system are detected.)
o-1) Check if there is a disconnected connector or a cutoff harness between UN525/J202F to UN401/J6004.
o-2) Replace the UN525 (24V Power Supply PCB F).
p) For the case that bit7 of [PWR- GP6] shows "1". (All 24V errors of 24VH system are detected.)
p-1) Check if there is a disconnected connector or a cutoff harness between UN527/J202Z to UN311/J4002.
p-2) Replace the UN527 (24V Power Supply PCB H).
q) For the case that bit8 of [PWR- GP6] shows "1". (All 24V errors of 24VI system are detected.)
q-1) Check if there is a disconnected connector or a cutoff harness between UN528/J202I to UN311/J4003.
q-2) Replace the UN528 (24V Power Supply PCB I).
r) For the case that bit9 of [PWR- GP6] shows "1". (All 24V errors of 24VJ system are detected.)
r-1) Check if there is a disconnected connector or a cutoff harness between UN529/J202J to UN311/J4004.
r-2) Replace the UN529 (24V Power Supply PCB J).
s) For the case that bit5 to bit9 of [PWR- GP7] show "1". (Contact failure of 24VA system is detected.)
s-1) Check if there is a disconnected Relay connector (J7886) between UN401/J6020, J6021 to UN102/J1800,J1801.
s-2) Check if there is a disconnected connector for UN401/J6020,J6021,UN102/J1800 and J1801.
t) For the case that bit4 to bit9 of [PWR- GP9] show "1". (Contact failure of 24VC system is detected.)
t-1) Check if there is a disconnected Relay connector (J7887) between UN401/J6025 to UN102/J1804.
181