Canon FAX-L380S Series Скачать руководство пользователя страница 172

Страница: 172 / 176

Chapter 6

6-2

F-6-2

[1] Document Sensor

Used to detect the presence/absence of a document.

[2] Document Edge Sensor

Used to detect the lead and rear edges of a document.

[3] Cassette Paper Sensor

Used to detect the presence/absence of paper in the cassette.

[4] Manual Feed Paper Sensor

Used to detect the presence/absence of paper in the manual feed section.

[5] Paper Leading Edge Sensor (top sensor)

Used to detect the leading/trailing edge of paper being moved.

[6] Paper Delivery Sensor

Used to monitor the delivery of paper.

[7] Paper Full Sensor

Used to detect the full loading of the paper.

[8] Front Cover Switch

Used to detect the state (open/closed) of the front cover.

[9] Toner Sensor

Used to detect the presence/absence of toner in the toner cartridge.

6.1.2 PCBs

6.1.2.1 Arrangement of PCBs

0011-9526

FAX-L380S

[3]

[6]

[1]

[8]

[2]

[7]

[4]

[5]

[9]

Содержание FAX-L380S Series

















































































































































































Результаты поиска

Содержание FAX-L380S Series

Отзывы:

Canon FAX-L380S Series, Руководство по обслуживанию, Страница: 172 / 176

Результаты поиска

Содержание FAX-L380S Series

Отзывы: