Canon FAX-L380S Series, Руководство по обслуживанию, Страница: 151 / 176

Chapter 5
5-21
5.5.3.8.2 Details of Bit 0
0011-6891
/ / FAX-L390 / / / FAX-L380S
Select whether to use the V.8 protocol when calling. If No is selected, the V.8 protocol is inhibited at calling and the V.21 protocol is used.
5.5.3.8.3 Details of Bit 1
0011-6892
/ / FAX-L390 / / / FAX-L380S
Select whether to use the V.8 protocol when called. If No is selected, the V.8 protocol is inhibited when called and the V.21 protocol is used.
5.5.3.8.4 Details of Bit 2
0011-6894
/ / FAX-L390 / / / FAX-L380S
If ANSam signal is not received during transmission (mainly manual transmission), select whether to use the V.8 protocol when the other fax machine declares the
V.8 protocol in DIS signal.
If "Yes" is selected, CI signal is transmitted to DIS signal of the other party, and the V.8 protocol is performed.
If "No" is selected, CI signal is not transmitted to DIS signal of the other party, and V.21 protocol is performed.
5.5.3.8.5 Details of Bit 3
0011-6895
/ / FAX-L390 / / / FAX-L380S
If the calling party cannot recognize ANSam signal when a call is received, select whether to declare the use of the V.8 protocol for the following transmitted DIS
signal.
If "Yes" is selected, the machine declares the use of the V.8 protocol in DIS signal, and performs the V.8 protocol after the calling party transmits CI signal.
If "No" is selected, the machine does not declare the use of the V.8 protocol in DIS signal, and perform the V.21 protocol.
5.5.3.8.6 Details of Bit 4
0011-6897
/ / FAX-L390 / / / FAX-L380S
Select whether the receiver falls back during V.34 reception.
If "Prohibit" is selected, the receiver does not fall back.
5.5.3.8.7 Details of Bit 5
0011-6899
/ / FAX-L390 / / / FAX-L380S
Select whether the transmitter falls back during V.34 transmission.
If "Prohibit" is selected, the transmitter does not fall back.
5.5.4 Menu Switch Settings (MENU)
5.5.4.1 #2 MENU
0011-6901
/ / FAX-L390 / / / FAX-L380S
T-5-20
No.008
Use it to to set an upper limit to the mojulation speed (baud rate) for the V.34 primary channel.
No.009
Use it to to set an upper limit to the data transmission speed for the V.34 primary channel between 2.4k and 33.6k bps in increments of 2.4kbps.
5.5.5 Numeric Parameter Settings (NUMERIC Param.)
5.5.5.1 #3 NUMERIC Param.
0011-6903
/ / FAX-L390 / / / FAX-L380S
2 Caller V.8 protocol late atart No Yes*
3 Called party V.8 protocol late start No Yes*
4 V.34 reception fallback Prohibited Not prohibited*
5 V.34 transmission fallback Prohibited Not prohibited*
6 Not used - -
7 Not used - -
No. Function Selection range Default
setting
008 V.34 modulation speed upper limit 2400 - 3429 (baud) 3429
009 V.34 data speed upper limit 2.4 - 33.6 (kbps) 33.6
Bit Function 1 0