Canon FAX-L380S Series, Руководство по обслуживанию

Страница: 150 / 176

Chapter 5
5-20
T-5-17
5.5.3.6.2 Details of Bit 0
0011-6880
/ / FAX-L390 / / / FAX-L380S
It is possible to select whether or not to detect carrieir disconnection between the DCS signal and the TCF signal during reception.
If the receiving machine returns an FTT signal while the other machine (PC-FAX) is transmitting a TCF siganl and a reception error occurs, set this bit to "1".
If thw error still occurs, set bit 1 of #1 SSSW SW18 to "1".
5.5.3.6.3 Details of Bit 1
0011-6882
/ / FAX-L390 / / / FAX-L380S
It is possible to select the detection time for caarrier disconnection between the DCS signal and TCF signal during reception.
This bit is available for use when #1 SSSW SW18 Bit0 is set to "1".
If the symptom is not resolved by setting SW18 Bit 0 to "1," set this bit to "1."
5.5.3.7 SSSW-SW26
5.5.3.7.1 List of Functions
0011-6885
/ / FAX-L390 / / / FAX-L380S
T-5-18
5.5.3.7.2 Details of Bit 2
0011-6887
/ / FAX-L390 / / / FAX-L380S
Select whether to indicate a confirmation message before broadcast, which makes transmission to multiple destinations, is performed so as to prevent wrong broad-
cast caused by misoperation of users.
If "Yes" is selected, when multiple destinations are specified and press the Start button to start the transmission, a message whether to perform broadcast appears
on the display for confirmation.
5.5.3.7.3 Details of Bit 3
0011-6889
/ / FAX-L390 / / / FAX-L380S
You may disable selection of multiple address to prevent broadcasting by mistake (on the part of the user); however, this setting will not affect broadcasting by
group dialing.
5.5.3.8 SSSW-SW28
5.5.3.8.1 List of Functions
0011-6890
/ / FAX-L390 / / / FAX-L380S
T-5-19
Bit Function 1 0
0 Detection of carrier disconnection between the DCS
signal and the TCF signal Yes No*
1 Waiting time for carrier disconnection between the DCS
signal and the TCF signal 600 msec 300 msec*
2 Not used - -
3 Not used - -
4 Not used - -
5 Not used - -
6 Not used - -
7 Not used - -
Bit Function 1 0
0 Not used - -
1 Not used - -
2 Confirmation of broadcast to be performed Yes No*
3 Prohibit broadcast Yes No*
4 Not used - -
5 Not used - -
6 When Stop button is pressed during s sequential
broadcasting Only cancel
communcation Cancel all
communication*
7 Error transmission report when transmission is stopped Not output Output*
Bit Function 1 0
0 Caller V.8 protocol No Yes*
1 Called party V.8 protocol No Yes*