![background image](http://html.mh-extra.com/html/canon/dr-6080/dr-6080_service-manual_62889119.webp)
COPYRIGHT © 2003 CANON ELECTRONICS INC. CANON DR-6080/9080C FIRST EDITION OCT. 2003
3 - 37
CHAPTER 3 DISASSEMBLY & REASSEMBLY
3. Shading
plate
assembly
(lower
side)
1) Detach the platen unit and the front platen
roller. Refer to the "Front platen roller"
section.
2) Remove two screws
(one on each side),
two shafts
(one on each side), and the
spring
in sequence and detach the
shading plate assembly (lower side)
.
Note:
Do not crease or scratch the shading
plate.
Screw
Shaft
Spring
Shading plate assembly (lower side)
Fig. 3-405
Precautions during assembly
•
Hang either side of the left-side spring on the
shading plate assembly, and fix the left-side
shaft.
•
After referring to the "Shading solenoid (lower
side)" section, adjust the positioning of the
gears on the shading plate side and the
solenoid side, and also adjust the position of the
solenoid.
•
Clean the shading plate.
4. Shading
plate
assembly
(upper
side)
1) Detach the upper unit.
2) Detach the back platen roller. Refer to the
"Back platen roller" section.
3) Remove two screws
(one on each side),
shaft A
, shaft B
, and the spring
in
sequence, and then detach the shading plate
assembly (upper side)
.
Screw
Shaft A
Shaft B
Spring
Shading plate assembly (upper side)
Fig. 3-406
Precautions during assembly
•
Insert the spring onto shaft A (longer one) and
hang the either side of the spring on the
shading plate assembly.
•
After referring to the "Shading solenoid (upper
side)" section, adjust the positioning of the
gears on the shading plate side and the
solenoid side, and also adjust the position of the
solenoid.
•
Clean the shading plate.
Содержание DR-6080
