![background image](http://html.mh-extra.com/html/canon/dr-6080/dr-6080_service-manual_62889306.webp)
60
Chapter 5
Other Functions
Setting in the User Mode
You can select the mode of operation (user mode) for the scanner from those
listed below.
●
Operation panel buzzer setting
U01-0
Do not sound buzzer during key operation.
U01-1
Sound buzzer during key operation (default).
●
Count Only mode setting
U02-0
Do not use the endorser in the Count Only mode (default).
U02-1
Use the endorser in the Count Only mode.
●
Endorser Stamp mode setting
U03-0
Use the endorser in the check mode (default).
U03-1
Use the endorser in the A4 mode.
●
Double feed detection control settings in the Count Only mode
U04-0
Do not detect double feed in the Count Only mode (default).
U04-1
Detect double feed in the Count Only mode.
●
Staple detection settings in the Count Only mode
U05-0
Do not detect staples in the Count Only mode (default).
U05-1
Detect staples in the Count Only mode.
●
Staple detection accuracy settings
U06-0
Low level accuracy staple detection.
U06-1
Medium level accuracy staple detection (default).
U06-2
High level accuracy staple detection.
●
Imprinter control settings in the Count Only mode
U07-0
Do not use the imprinter in the Count Only mode (default).
U07-1
Use the imprinter in the Count Only mode.
●
Skew detection control settings in the Count Only mode
U08-0
Do not use skew detection in the Count Only mode.
U08-1
Use skew detection in the Count Only mode (default).
●
Energy-saving mode setting
U09-0
Do not go into energy-saving mode.
U09-1
Go into energy-saving mode after 10 minutes of no operation
(default).
Содержание DR-6080
