![background image](http://html.mh-extra.com/html/canon/dr-6080/dr-6080_service-manual_62889347.webp)
101
ENGLISH
Power requirement
AC 220-240V (50/60 Hz)
AC 120V (60 Hz)
Power consumption
220-240V model
Operating:
0.5 A maximum
Standby:
Under 0.23 A
120V model
Operating:
1 A maximum
Standby:
Under 0.23 A
Noise
Less than 70 dB
Operating environment
Temperature: 10°C to 32.5°C (50°F to 90.5°F)
Humidity:
20% to 80% RH
●
You can use the functions noted above if the software supports them.
●
They may not work depending on your computer’s capabilities and the
software you are using.
●
If the scanning conditions are set to duplex scanning, color scanning, or high
density (600 dpi) scanning, then large documents such as
11" x 17"
size paper
and A3 size paper cannot be scanned. Change the scan conditions to scan
these sizes.
Specifications are subject to change without notice.
Options
Imprinter
Prints a variety of text messages on the front of the scanned
document.
Endorser
Endorses a variety of text messages and a six digit number on
the back of the scanned document.
Hard Counter
Counts the number of pages fed through the scanner.
Bar Code Module
Add on software that allows bar codes to be recognized by the
ISIS/TWAIN driver.
●
When using the endorser, the scanning speed lowers to match the printing
speed of the endorser.
●
Ink cartridge for the imprinter is not included. Please purchase the Hewlett-
Packard ink cartridge.
●
Contact your sales representative for information about optional products.
Consumables
Exchange Roller Kit
This kit is for replacing the feed rollers. If a roller replacement
message appears, contact your service representative to buy an
Exchange Roller Kit.
(See “Replacing the Rollers,” on p.88.)
Specifications
Содержание DR-6080
