![background image](http://html.mh-extra.com/html/canon/dr-6080/dr-6080_service-manual_62889141.webp)
COPYRIGHT © 2003 CANON ELECTRONICS INC. CANON DR-6080/9080C FIRST EDITION OCT. 2003
4 - 13
CHAPTER 4 INSTALLATION & MAINTENANCE
No. Procedure
Inspection/Remarks
10
Open the document eject tray guide of the
DR-6080/9080C outwards. Install the endorser
main unit onto the delivery area of the
DR-6080/9080C. Make sure to hold the handles
of the right/left cover of the endorser. Also make
sure that the rear connector and the positioning
pin are inserted into the DR-6080/9080C, and
the lower front part of the right/left cover is fit
into the upper unit guide.
Note:
Before installing the endorser, open the
document eject tray extension, if
needed.
Guide
(for each side)
View of opened document eject tray extension
11
Install the die drum 300.
Note:
Attach the stamping plate properly.
12
Set the ink roller.
Note:
If the height of the ink roller has to be
adjusted, use the adjusting screw,
which was adjusted in accordance with
the standard ink roller before shipping.
13
Check that the unit operates normally. For
details on how to operate it, refer to the user’s
manuals for the DR-6080/9080C and ED600.
Содержание DR-6080
