7
ENGLISH
Installation Location
More than 100 mm
More than
100 mm
More than 660 mm
More than
100 mm
630 mm
(with document
tray extension closed)
810 mm
(with document
tray extension,
extension wire open)
For operation, maintenance and ventilation, make sure that there is enough space
around the scanner, as shown in the illustration above.
Avoid placing the scanner in the following places. Doing so may cause a
malfunction and adversely affect the scanner or your computer.
• Places exposed to direct sunlight
If installation in such places is unavoidable, provide a curtain or similar object to
shade the scanner.
• Places subject to dust and fumes
Dust and cigarette fumes adversely affect the components inside the scanner.
• Near running water, a heat source, water vapor, or in an area such as a
laboratory exposed to ammonia gas, paint thinner, or other volatile chemicals.
• Places subject to vibration and strong shock
• Places subject to rapid changes in temperature or humidity
Condensation occurring inside the scanner may impair scan image quality. Place
the scanner in a room that is well within the following range:
Room temperature
10°C to 32.5°C (50°F to 90.5°F)
Relative humidity
20% to 80% RH
Use the recommended operating environment for the ink cartridge when using
the imprinter.
• Near electronic equipment or heavy equipment that generates a strong
magnetic field, such as a speaker, TV, and radio.
Содержание DR-6080
