RealTrace Mini Reader RT10M, Руководство пользователя

Страница: 1 / 9

1
“Mini Reader RT10M”
The “Mini Reader” is the smallest RFID reader known today. In spite of its very small size the reading range is equal or
even greater than other bigger models and more expensive.
This product is mainly used for animal tag ID microhip. It can read any work based on ISO 11784 / 85 protocol animals
tags especially the FDX B.
Technical parameter
Operation
Power on
Push the button, the “Mini Reader” power on. The LCD display shows :
Power off
The “Mini Reader” will auto power off in the absence of any action after 15 seconds except if it is connected to a PC
USB port directly or by a cable line.
Set language
When the “Mini Reader” is power down, push the button brevemente until to hear a “beep”, in order to enter to setting
“LANGUAGE” or “MEMORY” mode. Stop to push the button when the display shows “LANGUAGE” The different
languages will scroll on the display. Each language will remains 2 seconds. When the language you want to setting, just
push the button. Then the reader will use the setting when next power on.
Remarks: when the battery LI-Ion is low powered, the key reader may not read any tag or can read in a very short
distance. If the temperature is lower than 10° the reading range will be decreasing
Frequency 134.2KHz
Battery Li-ion
，
3.7VDC,170mAH
Charging current 5VDC on USB connector
Charging indication
Red LED in charging.
Green LED when complete.
Read Range
≥ 60/70mm
Read indication Beep
、
Blue LED
、
LCD indication
Dimensions 109×34×14mm
Operating temperature: (while battery under charge) +5° /40°
Memory 128 ID numbers
Mini Reader