77
ENGLISH
Error code
J01
Cause
Staple detected, document transfer stopped.
Remedy
Open the upper scanner and remove the document. Check to see if
the document was scanned correctly, and scan the document
again.
Error code
J02
Cause
Staple detected, document feed stopped.
Remedy
Open the upper scanner and remove the document. Check to see if
the document was scanned correctly, and scan the document
again.
Error code
J18
Cause
Detected a skewed document, document feed stopped.
Remedy
Open the upper scanner and remove the document. Check to see if
the document was scanned correctly, and scan the document
again.
Error code
P00
Cause
Document detected in the scanner when the power was turned
ON or the upper scanner was open.
Remedy
Remove the document that was left in the scanner. (See p.67.)
Error code
P02
Cause
Detected a document that is longer than the document that is
set.
Remedy
Open the upper scanner and remove the document. Check to see if
the document was scanned correctly, and scan the document
again.
Error code
P03
Cause
Detected a document that is shorter than the document that is
set.
Remedy
Open the upper scanner and remove the document. Check to see if
the document was scanned correctly, and scan the document
again.
6.5 When an Error Code Is Displayed
Содержание DR-6080
