manualshive.com logo in svg

Canon Colorado 1630, Руководство по эксплуатации

Поделиться
Скачать
Canon Colorado 1630 Скачать руководство пользователя страница 252

4.

Take the empty bottle out of the slot.

5.

Dispose the bottle as chemical waste according to local regulations.
If preferred and possible, you can repeat the steps to take out all bottles.

6.

Take a lint free cloth and clean the indicated areas surrounding the slots until all residue ink is
gone.
If necessary, dampen a swab with the cleaning liquid to remove any remaining ink.

7.

When all residue ink is removed, dispose the gloves and cloths as chemical waste according to
local regulations.

Result

If preferred and possible, you can place new bottles and refill ink. The order of the bottles from
left to right is YCMK. For more information, see 

Refill ink on page 196

.

Clean the ink unit

252

Chapter 6 - Maintain the system

Содержание Colorado 1630





































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды