manualshive.com logo in svg

Canon Colorado 1630, Руководство по эксплуатации

Поделиться
Скачать
Canon Colorado 1630 Скачать руководство пользователя страница 306

Field

Description

mediatype

The name of the media type that is displayed on the operator panel.

mediawidth

<num> in 0.1 mm (0.004 inch). The width of the media on which the job is prin-
ted.

media
lengthused

<num> in 0.1 mm (0.004 inch). The length of the media that is used for the job.
Media that is used for calibrations or maintenance actions is not included.

printedarea

<num> in 1 mm² (0.004 inch²). Area of the media that is covered by images. This
includes white pixels, and excludes any empty space surrounding the images.

NOTE

When the RIP nests images, the empty space is considered part of the
image and included in the 'printedarea'.

inkcolorcyan <num> in 1 ul. The total amount of cyan ink used.

inkcolor ma-
genta

<num> in 1 ul. The total amount of magenta ink used.

inkcolor yel-
low

<num> in 1 ul. The total amount of yellow ink used.

inkcolor
black

<num> in 1 ul. The total amount of black ink used.

Download an account log file

306

Chapter 9 - Troubleshooting and support

Содержание Colorado 1630





































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды