manualshive.com logo in svg

Canon Colorado 1630, Руководство по эксплуатации

Поделиться
Скачать
Canon Colorado 1630 Скачать руководство пользователя страница 180

8.

Take a lint free cloth and clean the clean wall until all residue ink is gone.
If necessary, dampen a swab with cleaner MB to remove any remaining ink.

CAUTION

Only use the cleaning liquid cleaner MB - Methyl benzoate in combination with swabs.
Do not use a lint free cloth.

IMPORTANT

Make sure the clean wall does not click out of the holder.

9.

Carefully release the clean wall.

10.

Take a lint free cloth to clean the rest of the maintenance station (green indicated area). Clean
until all residue ink is gone.
If necessary, dampen a swab with cleaner MB to remove any remaining ink.

Clean the maintenance station, wiper and clean wall

180

Chapter 6 - Maintain the system

Содержание Colorado 1630





































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды