manualshive.com logo in svg

Canon Color imageCLASS MF9220Cdn, Основное руководство по эксплуатации

Поделиться
Скачать
Canon Color imageCLASS MF9220Cdn Скачать руководство пользователя страница 443

11-8

Replacing the Toner Cartridges

M

ain
tenanc

e

Replacing the Toner Cartridge with a New One

If any of the following messages appears, replace the toner cartridge of the indicated color with a new one.

<Replace the toner cartridge. (Black)>: Replace the black toner cartridge.
<Replace the toner cartridge. (Yellow)>: Replace the yellow toner cartridge.
<Replace the toner cartridge. (Cyan)>: Replace the cyan toner cartridge.
<Replace the toner cartridge. (Magenta)>: Replace the magenta toner cartridge.

Do not dispose of used toner cartridges in open flames. This may cause the toner remaining inside the cartridges to ignite, resulting in 
burns or fire.

Do not pull out the sealing tape forcefully or stop at midpoint, as this may cause toner to spill out. If toner gets into your eyes or 
mouth, wash them immediately with cold water and consult a physician.
When closing the front cover, be careful not to get your fingers caught.

–
–
–
–

–

–

1

 

Open the front cover by using the handle 

(A).

The toner cartridges are installed in order of black, 
yellow, cyan, and magenta from the top as shown 
in the figure.

2

 

To prevent damage to the transfer belt of 

the delivery feeder unit (A), cover the thin 

plastic belt with paper (A4 size paper is 

recommended) as shown in the figure 

and be sure that they do not move out of 

place.

Содержание Color imageCLASS MF9220Cdn





































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды