Canon BJC-S300, Быстрый старт

Страница: 36 / 64

Troubleshooting
3 30 0
Printer is not
responding
(continued)
Problem Possible Cause Try This
Computer and/or
printer needs to
be reset Reboot the computer and/or reset the printer.
1. To reboot the computer, close all open applications, then restart.
2. To reset the printer, turn it off, then on again.
Ink tanks are not
seated properly Printer tried
to print but
no ink on
paper Check that the ink tanks have been firmly seated in the printhead,
and reseat the ink tanks if necessary. See “Replacing Ink Tanks” on
page 21.
Printhead
clogged/not
working properly
Verify that the printhead is working properly. See “Printing a Nozzle
Check Pattern” on page 22 or “Cleaning the Printhead” on page 24.
If necessary, perform multiple printhead cleanings. If print quality
does not improve, try deep cleaning. Perform printhead deep
cleaning from the printer driver.
If the problem persists, contact the Customer Care Center.
Problem Possible Cause Try This
Printed
output is
faded/colors
are incorrect Printhead is
clogged/ink tank
needs replacing 1. Print a nozzle check pattern to determine if the print head nozzles
are clogged. See “Printing A Nozzle Check Pattern” on page 22.
2. If the nozzles are clogged, you will need to clean the printhead.
See “Cleaning the Printhead” on page 24.
3. If print quality does not improve, try deep cleaning the printhead.
Perform printhead deep cleaning from the printer driver.
4. Replace one or both ink tanks. See “Replacing Ink Tanks” on page
21.
If the problem persists, contact the Customer Care Center.
TTrro ou ub blle es sh ho oo ottiin ng g P Prriin ntte ed d O Ou uttp pu utt
Faulty cable Replace the printer cable.
Ink tanks may
need to be
replaced One or both ink tanks may be low. See “Monitoring Ink Levels” on
page 19.
If necessary, replace the ink tanks. See “Replacing Ink Tanks” on
page 21.
Incorrect Color
Adjustment
setting
W W
IIN ND DO OW WS S
1. On the M
Ma aiin n tab of the S300 Properties window, confirm
that Color Adjustment is set to A Au utto o.
2. If M Ma an nu ua all is set, click the D De effa au ulltts s button on the Manual
Color Adjustment window.
S300 Chapter 04.qxd 5/12/01 1:40 PM Page 30