Camera EOS 20D Digital, Инструкция по эксплуатации

Страница: 28 / 85

54
With just one shot, three images having a different color tone can be recorded
simultaneously. Based on the white balance mode’s standard color temperature, the
image will be bracketed with a blue/amber bias or magenta/green bias. This is called
white balance bracketing. It can be set up to ±3 levels in single-level increments.
1
Set the image-recording quality to
any setting except RAW and
RAW+JPEG.
(p.46)
2 Select [WB SHIFT/BKT].
¡
Turn the <
5
> dial to select [
z
WB
SHIFT/BKT ], then press <
0
>.
s
The WB correction/WB bracketing
screen will appear.
3
Set the bracketing amount.
¡
Turn the <
5
> dial to set the
bracketing direction and bracketing
level.
¡
When you turn the <
5
> dial, “ ” on
the screen will change to “ ” (3
points). Turning the <
5
> dial to the
right sets the B/A bracketing, and
turning it to the left sets the M/G
bracketing.
¡
Set the bracketing level for the B/A or
M/G bias up to ±3 levels in single-
level increments. (The bracketing
level cannot be set for both the B/A
and M/G bias.)
s
On the right side of the screen, “ BKT ”
indicates the bracketing direction and
the bracketing level is also displayed.
¡
Press <
0
> to exit the setting and
return to the menu.
3
White Balance Auto Bracketing
N
B/A bias ±3 levels
M/G bias ±3 levels
55
3
White Balance Auto Bracketing
N
4 Take the picture.
s
When B/A bracketing has been set, the
three images will be recorded onto the
CF card in the following sequence:
Standard WB, B (blue) bias, and A
(amber) bias. If M/G bracketing has
been set, the sequence will be
Standard WB, M (magenta) bias, and
G (green) bias.
¡
The current drive mode (p.72) will be
used for the shooting.
¡
In step 3, set “ BKT ” to “ ±0 ” (“ ” to
“ ” (1 point)).
Canceling White Balance Auto Bracketing
¡
White balance bracketing will not work if the image-recording quality is
set to RAW or RAW+JPEG.
¡
With white balance bracketing, the maximum burst will be 6 shots.
¡
When white balance bracketing is set, the white balance icon will blink on
the LCD panel and the remaining shots will decrease to about 1/3.
¡
Since three images are recorded for one shot, the CF card will take
longer to record the shot.
¡
You can also set white balance correction and AEB shooting in
combination with white balance bracketing. If you set AEB in
combination with white balance bracketing, a total of nine images will be
recorded for a single shot.
¡
“ BKT ” stands for bracketing.