Camera EOS 20D Digital Скачать руководство пользователя страница 21

Страница: 21 / 85

All you do is point the camera and press the shutter button. Everything
is automatic so it is easy to photograph any subject. With nine AF points
to focus the subject, anyone can easily take nice pictures.

Set the Mode Dial to <

Automatically, the AF mode will be set
to <

>, the drive mode will

be set to <

>, and the metering

mode will be set to <

Aim any AF point on the subject.

Out of the nine AF points, the one
covering the closest subject is
selected automatically to achieve
focus.

Focus the subject.

Press the shutter button halfway to
focus.

The AF point which achieves focus
ﬂashes in red brieﬂy. If focus cannot
be achieved, the beeper will sound
and the focus conﬁrmation light <

in the viewﬁnder will blink.

If necessary, the built-in ﬂash will pop-
up automatically.

Check the display.

The shutter speed and aperture value
will be set automatically and
displayed in the viewﬁnder and on the
LCD panel. (

)

Using Full Auto

AF point

Shutter speed

Aperture

Focus conﬁrmation light

Using Full Auto

Take the picture.

Compose the shot and press the
shutter button completely.

The captured image will be displayed
for about 2 sec. on the LCD monitor.

To view the images recorded on the
CF card, press the <

> button.

(p.103)

While focusing with <

>, do not touch the focusing ring at the front of

the lens.

If you want to zoom, do it before focusing. Turning the zoom ring after
achieving focus may throw off the focus.

When the CF card becomes full, the CF Full warning “

FuLL CF

” will

appear in the viewﬁnder and on the LCD panel and shooting will be
disabled. Replace the CF card with one that has room.

If something obstructs the built-in ﬂash from popping up, “

Err 05

” will

blink on the LCD panel. If this happens, turn the <

> switch to <

and set it back to <

Using a non-Canon lens with an EOS camera may not result in proper
camera or lens operation.

When focus is achieved, the focus and exposure setting will also be
locked.

If the focus conﬁrmation light <

> blinks, the picture cannot be taken.

(p.70)

Multiple AF points may ﬂash simultaneously in red.This indicates that
focus has been achieved at all those AF points.

In the Basic Zone modes (except <

> <

>), the built-in ﬂash

will pop up and ﬁre automatically in low-light or backlit conditions. To
retract the ﬂash, push it back down.

You can disable the beeper from sounding when focus is achieved. (p.90)

The image review time after image capture can be changed with the
menu’s [

Review time

] setting. (p.100)

If you want to select the AF point to be used for focusing, set the Mode
Dial to <

>, then follow “Selecting the AF Point” (p.67) to select the AF

point.

Содержание EOS 20D Digital






















































































Результаты поиска

Содержание EOS 20D Digital

Отзывы:

Похожие инструкции для EOS 20D Digital

Бренды по названию

Популярные бренды

Camera EOS 20D Digital, Инструкция по эксплуатации

Результаты поиска

Содержание EOS 20D Digital

Отзывы:

Похожие инструкции для EOS 20D Digital

Бренды по названию

Популярные бренды