Camera EOS 20D Digital Скачать руководство пользователя страница 76

Страница: 76 / 85

150

If there is a problem, ﬁrst refer to this Troubleshooting Guide.

You are using the wrong battery.

Do not recharge any battery pack other than Battery Pack BP-
511A, BP-514, BP-511, or BP-512.

The battery is not properly attached to the battery charger.

Attach the battery properly to the charger. (p.18)

The battery is exhausted.

Recharge the battery. (p.18)

The battery is not installed properly.

Install the battery properly. (p.20)

Battery compartment cover is not closed.

Close the battery compartment cover tightly. (p.20)

CF card slot cover is not closed.

Close the CF card slot cover ﬁrmly. (p.24)

If you set the <

> switch to <

> right after shooting, the

access lamp will still light/blink for a few seconds while the
image is recorded onto the CF card.

When the camera ﬁnishes recording the image to the CF card, the
access lamp will stop blinking and the power will turn off
automatically.

The battery is not fully charged.

Recharge the battery fully. (p.18)

The battery’s service life has expired.

Replace the battery with a new one.

Troubleshooting Guide

Power Source

The battery cannot be recharged.

The camera does not operate even when the <

> switch is set

to <

> or <

The access lamp blinks even when the <

> switch is set to <

The battery becomes exhausted quickly.

151

Troubleshooting Guide

Auto power off is in effect.

Press the shutter button halfway. If you do not want auto power off
to take effect, set [

Auto power off

] on the menu to [

Off

The battery is almost exhausted.

Recharge the battery. (p.18)

The CF card is not properly inserted.

Insert the CF card properly. (p.24)

The CF card is full.

Use a new CF card or erase unnecessary images. (p.24, 112)

The battery is exhausted.

Recharge the battery. (p.18)

You did not focus well. (The focus conﬁrmation light <

> in

the viewﬁnder blinks.)

Press the shutter button halfway again and focus the subject. If
you still cannot focus properly, focus manually. (p.26, 70)

The LCD monitor screen is dirty.

Use a soft, lens cloth to clean the screen.

The LCD’s service life has expired.

Consult your nearest customer service center or dealer.

The camera turns off by itself.

Only the <

> icon blinks on the top LCD panel.

Shooting

No images can be shot or recorded.

The LCD monitor does not display a clear image.

Содержание EOS 20D Digital






















































































Результаты поиска

Содержание EOS 20D Digital

Отзывы:

Похожие инструкции для EOS 20D Digital

Бренды по названию

Популярные бренды

Camera EOS 20D Digital, Инструкция по эксплуатации

Результаты поиска

Содержание EOS 20D Digital

Отзывы:

Похожие инструкции для EOS 20D Digital

Бренды по названию

Популярные бренды