Camera EOS 20D Digital Скачать руководство пользователя страница 12

Страница: 12 / 85

With AC Adapter Kit ACK-E2 (optional), you can connect the camera to
a household power outlet and not worry about the battery level.

Connect the DC Coupler.

Connect the DC Coupler’s plug to the
AC adapter’s socket.

Connect the power cord.

Connect the power cord to the AC
adapter.

Insert the plug into a power outlet.

When you are ﬁnished, disconnect
the plug from the power outlet.

Place the cord in the groove.

Carefully insert the cord into the
groove without damaging it.

Insert the DC Coupler.

Open the battery compartment cover
and open the DC Coupler cord notch
cover.

Insert the DC Coupler until the lock
position and put the cord through the
notch.

Close the cover.

Using a Household Power Outlet

Do not connect or disconnect the power cord while the camera’s <

switch is set to <

> or <

Remove the caps.

Remove the rear lens cap and the
body cap by turning them as shown
by the arrow.

Attach the lens.

Align the EF-S lens with the camera’s
white EF-S lens mount index and turn
the lens as shown by the arrow until it
clicks in place.

When attaching a lens other than an
EF-S lens, align the lens with the red
EF lens index mark.

On the lens, set the focus mode
switch to <AF>.

If it is set to <

>, autofocus will not

be possible.

Remove the front lens cap.

While pressing the lens release
button, turn the lens as shown by
the arrow.

Turn the lens until it stops, then
detach it.

Mounting and Detaching a Lens

Mounting a Lens

EF-S Lens mount index

EF lens mount index

Detaching the Lens

When attaching or detaching the lens, take care to prevent dust from
entering the camera through the lens mount.

Содержание EOS 20D Digital






















































































Результаты поиска

Содержание EOS 20D Digital

Отзывы:

Похожие инструкции для EOS 20D Digital

Бренды по названию

Популярные бренды

Camera EOS 20D Digital, Инструкция по эксплуатации

Результаты поиска

Содержание EOS 20D Digital

Отзывы:

Похожие инструкции для EOS 20D Digital

Бренды по названию

Популярные бренды