Camera EOS 20D Digital, Инструкция по эксплуатации

Страница: 31 / 85

3
Setting the Processing Parameters
N
60
The same effect as using filters with black-and-white film can be
obtained with digital images. A color can be brightened by using a filter
having a similar or same color. At the same time, the complementary
colors will be darkened.
v
When color toning is set, color toning will be applied to the captured
black-and-white image before being recorded to the CF card. It can
make the image look more impressive.
The following can be selected:
[
N:None ] [ S:Sepia ] [ B:Blue ] [ P:Purple ]
[ G:Green ]
Filter effects
Filter Sample effects
N: None
Normal black-and-white image with
no filter effects.
Ye: Yellow
The blue sky will look more natural,
and the white clouds will look
clearer.
Or: Orange
The blue sky will look slightly
darker. The sunset will look more
brilliant.
R: Red
The blue sky will look quite dark.
Fall leaves will look crisper and
brighter.
G: Green
Skin tones and lips will look fine.
Tree leaves will look crisper and
brighter.
Toning Effect
Setting the [ Contrast ] to the plus side will make the filter effect more
pronounced.
61
The file number is like the frame number on film. There are two file
numbering methods: [
Continuous ] and [ Auto reset ]. The images you
take are automatically assigned a file number from 0001 to 9999 and
saved in a folder (created automatically) that can hold up to 100
images.
1
Select [File numbering].
¡
Turn the <
5
> dial to select [
c
File
numbering ], then press <
0
>.
2
Select the file numbering method.
¡
Turn the <
5
> dial to select
[ Continuous ] or [ Auto reset ], then
press <
0
>.
The file numbering continues in sequence
even after you replace the CF card. This
prevents images from having the same file
number, so image management with a
personal computer is easier.
Each time you replace the CF card, the file
numbering will be reset to the first file
number (
XXX-0001 ). Since the file number
starts from 0001 in each CF card, you can
organize images according to CF card.
3
File Numbering Methods
Continuous
Auto reset
XXX-0051
CF card -1
XXX-0052
CF card -2
File numbering after
changing the CF card
Next sequential file number
XXX-0051
CF card -1
XXX-0001
CF card -2
File numbering after
changing the CF card
File number is reset
If folder No. 999 is created, [ Folder number full ] will appear on the LCD
monitor. Then if file No. 9999 is created, “ Err CF ” will be displayed on the
LCD panel and in the viewfinder. Replace the CF card with a new one.
For both JPEG and RAW images, the file name will start with “IMG_”. The file
name extension will be “.JPG” for JPEG images and “.CR2” for RAW images.