34
Set the date and time as shown below.
1
Select [Date/Time].
¡
Turn the <
5
> dial to select [
c
Date/
Time
], then press <
0
>.
s
The date/time screen will appear.
2
Set the date and time.
¡
Turn the <
5
> dial to select the digit,
then press <
0
>.
¡
The selection will then shift to the
next item.
3
Set the date display format.
¡
Turn the <
5
> dial to set the date
format to [
mm/dd/yy
], [
dd/mm/yy
], or
[
yy/mm/dd
].
4
Press <
0
>.
s
The date and time will be set and the
menu will reappear.
3
Setting the Date and Time
Each captured image is recorded with the date and time it was taken. If the
date and time are not properly set, the wrong date/time will be recorded.
Make sure you set the date and time correctly.
35
The date/time (back-up) battery maintains the camera’s date and time.
The battery’s service life is about 5 years. If the date/time is reset when
the battery is replaced, replace the back-up battery with a new CR2016
lithium battery as described below.
The date/time setting will also be reset, so you must set the
correct date/time.
1
Turn the <
4
> switch to <
2
>.
2
Open the cover and remove the
battery.
3
Take out the battery holder.
4
Replace the battery in the battery
holder.
¡
Make sure the battery is in the proper
+ –
orientation.
5
Close the cover.
Replacing the Date/Time Battery
(–)
(+)
For the date/time battery, be sure to use a CR2016 lithium battery.
Содержание EOS 20D Digital
Страница 1: ...E INSTRUCTION MANUAL E INSTRUCTION MANUAL ...