Cabletron Systems MMAC-Plus 9F116-01, Руководство пользователя, Страница: 82 / 420

5-6 FRX/FRM 3. 3 User G uide, Rev 04
The entry
I/O
identifies the LIC containing the port (
UNIVERSAL
for FRX4000 ports
0–3), and
Link State
will be one of these:
Link_disable
– The link was shut down by an on-line command, is undergoing re-
IPL, or has not yet been established.
Failed
– Some or all modem controls are missing. (This state is passed through
while a port is becoming enabled.)
Link_down
– The link was up, but has gone down.
Disconnect
– Level 2 cannot be established.
Linkup
– The level 2 link is up.
NA
– Some state other than those above has been entered.
To configure the port with the parameter values neccessary for your application, go to
the appropriate chapter:
●
Frame relay – Chapter 6
●
X.25 – Chapter 7
●
SNA – Chapter 8
●
Async – Chapter 10
●
BSC – Chapter 9
Configure the protocol that will run over the physical port.
If configuring a physical port that will contain logical ports, configure the physical
port as described in the appropriate chapter in the above list, then follow the procedure
under "Configuring a Logical Port" on page 6-21.