Cabletron Systems MMAC-Plus 9F116-01, Руководство пользователя, Страница: 276 / 420

15-4 FRX/FRM 3. 3 User G uide, Rev 04
C SDLC PU Status
– displays a list of configured station addresses for a
specified SNA port, including current active/inactive states.
D Bridge Status Displays
A Bridge Port Status Display
– displays a list of Bridge ports, including
type, active status, bridge state (forwarding, listening, etc.), and number
of bytes received and transmitted.
B Bridge Forwarding Table Display
– displays a list of MAC addresses and
their associated bridge ports, plus any flags that have been set.
E Frame Relay Backup Status
– displays the current state of frame relay
primary and backup DLCIs.
A Display States for all Backup DLCIs on a Port
B Display States for all Primary DLCIs on a Port
C Display States for all Backup DLCIs in a Group
F LLC/2 Session Status
– displays addresses and operational states of all
current LLC2 sessions.
G IP Routing Table Display
– displays interfaces, destinations, network masks,
and flags.
H IP ARP Table Display
– displays ARP IP addresses, MAC addresses, and
aging timers.
I IP Interfaces Display
– displays interface names, MTU values, network
names, masks, IP and remote addresses, and flags.
D Events
– (Chapter 18) Displays event (alarm) messages as they occur.
E Statistics
(Chapter 17)
A Configure LP/Port Thresholds
– allows creation of a threshold for a statistic that,
when crossed, will cause an alarm to be generated.
B Display LP/Port/Frame Statistics
– displays the supported statistics for the
specified component, showing current values, as well as the highest values
reached by each statistic since the node was last booted or since maximum
values were last cleared.
C Display IP Statistics
– displays the supported statistics, including current values
and cumulative values since maximum values were last cleared.
D Display ICMP Statistics
– displays the supported statistics, including current
values and cumulative values since maximum values were last cleared.
E Display IP Interface Statistics
– displays the supported statistics, including
current values and cumulative values since maximum values were last
cleared.
F Display IPX Interface Statistics
– displays the supported statistics, including
current values and cumulative values since maximum values were last
cleared.
G Display LAN Card Interface Statistics
– displays the supported statistics,
including current values and cumulative values since maximum values
were last cleared.
H Display Frame Relay Utilization Statistics
– displays CIR, B
E
, and B
C
values for
a specified DLCI, as well as the configured and actual percentages of
bandwidth use by each bandwidth allocation group.
F Reports
A
Create Configuration Report
– (Chapter 2) produces a summary of all database
records in the node.
B View Configuration Report
– (Chapter 2) displays the above summary.
C View Initialization Report
– (Chapter 1) produces a list of messages created
during the current boot-up of a node.
D View Previous Initialization Report
– (Chapter 1) produces a list of messages
created during the previous boot-up of a node.