Cabletron Systems MMAC-Plus 9F116-01, Руководство пользователя, Страница: 347 / 420

Syst em Events 18-7
311.
Rcv Frm/Sec exceeded T:“n” C:“n”
Severity: 4
Meaning: The port statistic
Received Frames/Sec (*100)
has exceeded the
threshold (
T:“n”
) that was set by the user. (
C:“n”
is the current
value.)
Action: If this happens frequently, you may need to reroute some traffic.
312.
Tran Frm/Sec exceeded T:“n” C:“n”
Severity: 4
Meaning: The port statistic
Transmitted Frames/Sec (*100)
has exceeded the
threshold (
T:“n”
) that was set by the user. (
C:“n”
is the current
value.)
Action: If this happens frequently, you may need to reroute some traffic.
313.
RTrn Frm/Sec exceeded T:“n” C:“n”
Severity: 4
Meaning: The port statistic
Retran Frames/Sec (*100)
has exceeded the
threshold (
T:“n”
) that was set by the user. (
C:“n”
is the current
value.)
Action: If this happens frequently, check the line for noise, and check for
configuration errors on both the port and the connected device.
314.
FCS Rej/Sec exceeded T:“n” C:“n”
Severity: 4
Meaning: The port statistic
FCS Errors/Sec (*100)
has exceeded the threshold
(
T:“n”
) that was set by the user. (
C:“n”
is the current value.) A value
consistently greater than zero indicates line problems.
Action: If this happens frequently, check the line for noise, and check for
configuration errors on both the port and the connected device.
315.
Log Rej/Sec exceeded T:“n” C:“n”
Severity: 4
Meaning: The port statistic
Logical Rejects/Sec (*100)
has exceeded the
threshold (
T:“n”
) that was set by the user. (
C:“n”
is the current
value.) A value consistently greater than zero indicates line
problems.
Action: If this happens frequently, check the line for noise, and check for
configuration errors on both the port and the connected device.
316.
Trn Err Ratio exceeded T:“n” C:“n”
Severity: 4
Meaning: The port statistic
Transmit Error Ratio
has exceeded the threshold
(
T:“n”
) that was set by the user. (
C:“n”
is the current value.)
Action: If this happens frequently, check the line for noise, and check for
configuration errors on both the port and the connected device.