Cabletron Systems MMAC-Plus 9F116-01, Руководство пользователя, Страница: 391 / 420

Net View Management E-3
Supported Commands
The syntax of a RUNCMD from NetView is generally as follows:
RUNCMP SP=OLXPu, APPL=NVOperid, command
where: OLXPu is the VTAM PU name of the FRX/FRM (NetView sees the FRX/FRM
as a PU),
NVOperid is the ID of the NetView operator issuing the command, and
command is the text of command sent to the FRX/FRM.
The command part of the RUNCMD is the only part that needs to be entered by an FRX/
FRM operator performing local access operations. Supported commands are
described over the next few pages.
Most of the commands include {linename[n|n|n],puname} in the format.
linename is the Name from the first screen of the SNA Port record, [n|n|n]
are options that can be specified if a line name was entered, and puname is
the PU Name from the PU Parameters screen of the SNA Port record.
Display Commands
DISPLAY ID
Function: Displays the active/inactive status of specified PUs.
Command: D NET, ID={linename[,A|E|I|N], puname}
Options:
A = all active PUs on the line.
E = all PUs on the line.
I = all inactive PUs on the line.
N = only the line status (no PUs). This is the default if no option is
entered.
DISPLAY LINES
Function: Displays the active/inactive status of specified lines.
Command:
D NET, LINES[,A|E|I]
Options:
A
= all active lines.
E
= all lines. This is the default if no option is entered.
I
= all inactive lines.
DISPLAY CONFIG
Function: Displays the configuration parameters for specified PUs.
Command:
D NET, CONFIG,ID={linename[,A|E|I],puname}
Options:
A
=all active PUs on the line.
E
=all PUs on the line.
I
=all inactive PUs on the line.