Cabletron Systems MMAC-Plus 9F116-01, Руководство пользователя, Страница: 51 / 420

Configuring Node Parameters 3-5
Node Defaults Parameters
All possible parameters on the first two Node Defaults screens are listed in Table 3-2,
and the NetView parameters on the third screen are listed in Table 3-3 (on page 3-9).
Descriptions of most parameters follow each table.
Depending on the values configured for some parameters, other parameters might not
be displayed.
1
Remember that the software sees uppercase as different from lowercase.
2
Can be:
◆
a 1–15 digit number (address).
◆
(FRX6000/FRM only) a COM port:
C1
or
C2
, plus
C3
or
C4
if the device contains those
ports.
◆
(FRX6000/FRM only) a parallel (LPT) port: P1, P2, P3.
3
A value of
0
means that no status will be sent.
4
If
0
, the connection will remain active continuously.
5
Continuous retries until connection is established.
6 Note that the parameter
On-Line Temporary Changes
appears on all three screens;
changing this parameter on one screen will automatically change it on the others.
Table 3-2 Node Defaults Parameters
Parameter Valid Values Default Value
Node Name
up to 8 characters none
Remote Control ID
0–15 digits none
Remote Control Pwd
0–15 characters
1 remote
Fi le Transfer ID 0–15 digits none
Fi le Transfer Pw d
0–15 characters
1
ftran
Coll ecting Node ID
0–15 digits none
Coll ecting Node Pwd 0–15 characters
1
al arms
Primary Al arm O utput ID
see footnote
2
none
Primary Al arm O utput Pwd
0–15 characters
1 al arms
Secondary Al arm Output ID
see footnote
2
none
Secondary Al arm Output Pw d 0–15 characters
1
al arms
Com. Port Thruput A–H H
(9600 bps)
Com. Port Pari ty 0, 1, 3 0 (none)
Com. Port Stopbi t 1, 2 1
Bi ts Per Character 7, 8 8
Coll ecting Node Y/ N N
Max Congesti on 1–50
(%)
50
Min Congestion 1–50 (%) 25
Periodic Status Timer 0–30 (min)
3
1
Li ne Idl e Timer
0–65535 (sec)
0
4
Al arm Autocall Timer
5–3600
(sec)
60
Al arm Max Retries 0–99 0 (no max)
5
On-Line Temporary Changes Y/ N Y